Five Nissan Qashqai Key Replacement Projects For Any Budget

· 4 min read
Five Nissan Qashqai Key Replacement Projects For Any Budget

How to Replace a Nissan Juke Spare Key

Nissan Juke is an attractive and fun hatchback that features a unique engine configuration. It's noisy, but still a blast to drive.

The battery that powers the key fob on the Nissan Juke has to be replaced every two years or so, or if it's low. You can do it yourself, however you'll need a few tools.

Dead Coin Battery

If your Nissan Juke key fob has stopped functioning the first thing you should be sure of is the battery inside it. It could be dead and require to be replaced. This is a straightforward fix that only takes some minutes. Flip the fob upside down and you can access the tiny latch/release on the back. Replace the battery that was in use by making sure it's facing the bottom of the fob. The two halves carefully.

If the fob has been exposed to water, it will need to be cleaned prior putting the new battery into. It is possible to clean the fob using isopropyl or electronic cleaner, and paper towels. Then, let it dry completely before installing the battery.

To start the car, the key fob must also be connected to the car. This can be accomplished according to the instructions in your owner's manual, or using an OBDII scan. The most likely reason why the key fob stopped working is that it was not connected to the car. It is also possible that the fob has malfunctioning chips, but this is not common. In this instance the need for a new receiver module may be needed. If this is the situation, it will have to be replaced by a skilled technician.

Water Damage

Key fobs are battery operated, and these batteries should be replaced every two years or every first sign of the car not responding when you press the "start" button. The key's rubber seals are designed to keep out water, however submerging the key fob in ocean or pool water can cause damage to the electronic chip. If this is the case, you'll need to get an alternate key from Nissan or locksmith.

It's possible that the computer has lost connection with the key fob This could be due to a variety of reasons. It can be fixed by restarting the car. If the "Key ID error" message still appears then you should contact Nissan for assistance.

The three most common reasons for this problem are dead key fob batteries, a non-programmed key, and a damaged or faulty key fob that is damaged or faulty.  G28CarKeys  are easy to resolve, while the latter is a bit harder to diagnose and repair immediately, but it is usually fixable with some patience. Compare Nissan Key Replacement costs near you using WhoCanFixMyCar and book your repair online. Read reviews about local Nissan dealerships, Nissan mechanics, and garages in a matter of seconds.

Faulty Chip


The key fob of your Nissan Juke contains a special chip that transmits a message to the vehicle every time you turn it. If the chip is defective it could cause the key to cease functioning. If this is the case the issue can only be solved by replacing the key. Your Nissan Juke key could be faulty for several reasons, including water damage or a dead battery for the coin.

If your key fob stopped working after an immersion in the wash or bath, you should check the chip for water damage. Verify that the metal clips that hold the chip are secure. Also, ensure that the chip isn't surrounded by water. If you observe any signs of water damage on the electronic component, take off the battery and clean it with isopropyl-ethanol or electronic cleaner.

If the chip is defective If it is damaged, you should visit your local locksmith or dealer. To find a replacement chip, they will require the year, model and year of your car. You will also have record your VIN (Vehicle ID Number) so the dealer or locksmith knows the key you have. This will enable them to check the correct key code, and ensure that they cut the correct key.

Faulty Receiver Module

The fob's key sends a radio signal to your vehicle that performs various functions. It can open the trunk when you are rushing to the car with groceries or start your car by pressing the button on the fob. It can even open your windows and switch on the horn if have a mishap and lock your keys inside the car.

If the key fob won't function, it could be due to a problem in the receiver module. The receiver modules are tuned to detect specific frequencies that match the signals generated by the Nissan key fob. If your car is equipped with an inoperable receiver module it will not respond to any signal coming from the key fob.

Whatever the way your Nissan key fob is damaged, it's always beneficial to have a spare in event that the key is damaged or lost. A locksmith or a dealership can program a spare key that works with your Nissan. This will save you from the hassle of losing your keys or locking them inside your car.

If your Nissan Juke's key fob was exposed to rain or clean tap water, you can fix the issue by cleaning it with isopropyl or an electronic cleaner. If, however, the chip has deteriorated it will be necessary to buy a new key fob, which can be programmed to your car through a locksmith or dealer.